Advice on stain colours

Posted in Block Paving, Colouring, Driveway, External Sealants, FAQ, Paving, Sealants   

This question was asked by
Jon-Luke Kirton

We have a a large driveway (approx 200m2) with standard red block pavers. We would like to change the colour of these to a slate grey colour (we have a period character sandstone and traditional scottish slate house). What products would you recommend for this look to be achieved?

To completely change the colour of the paving is entirely doable, I have linked below the products you would need and if you check out the videos section you will find how to guides for the prep and the application.

Firstly you would need to remove any sealer that might be on the surface using either the Solstrip or Easystrip 1000 for acrylic sealers or the Easystrip 2000 if it is a Polyurethane sealer.

Once this is done you will need to profile the surface to make it porous to accept the stain then you would apply the Solid colour stain as a base colour, then a diluted Smartcolour to give the 2 tone antiqued effect.

After the stain has cured for 24 hours you will need to re apply a sealer coat.

Solid Colour Stain (SOLID)

Smart Colour Stain (SMART)

EasyStrip 1000 Coating Remover (ES1000)

Eco Acid [profiler] (EA)

Drew Palin