August, 2018

Matching driveway colour issue

   Posted in FAQ   

This question was asked by
Chris Helliwell

My drive laying company has gone out of business
I have a 260sq m area which does not match the colour of the more recently laid extra 60 and how much do you think it will cost to get the 260sq m recovered

The Solid colour stain was designed to colour large areas of concrete 1 uniform colour, if you combine this with the smartcolour (diluted) you will get the same 2 tone look that Imprinted concrete should have.

Take a look at the videos section at www.adsealcolours.co.uk this will give you some idea of what is involved.

Endura Solid Stain (ESS)

Smart Colour Stain (SMART)

Drew Palin

Slate sealer for patio

   Posted in FAQ   

This question was asked by
Ian Mair

We have read reviews on the going expert site that have lead us to want to try your products.
We have a slate patio we have juts completed and the client wants it sealing to bring our the colours in the slate.
Do you stock anything water based for slate that can be applied immediately after install?

Unfortunately the one drawback of water based sealers is that they don’t enhance the colours in the paving so leave it looking more like it does when it is dry as opposed to when it is wet.

If you are looking to enhance the colours you will have to use a solvent based sealer such as the one below.

Stone & Slate Protector (SSP)

Drew Palin

Water based Slate sealer

   Posted in FAQ, Stone   

This question was asked by
Ian Mair

We have read reviews on the going expert site that have lead us to want to try your products.
We have a slate patio we have juts completed and the client wants it sealing to bring our the colours in the slate.
Do you stock anything water based for slate that can be applied immediately after install?

Unfortunately the one drawback of water based sealers is that they don’t enhance the colours in the paving so leave it looking more like it does when it is dry as opposed to when it is wet.

If you are looking to enhance the colours you will have to use a solvent based sealer such as the one below.

Stone & Slate Protector (SSP)

Drew Palin

Granite patio impregnator

   Posted in FAQ   

This question was asked by
Charlie McNicoll

I had a garden patio recently laid with granite slabs.
I want to prevent staining, grease, oil, ink etc but do not want a surface sealer, I need an impregnating sealer that will not require frequent relaying.
I was recommended Advanced HD sealant , but your web site says it gives a surface sheen and I do not want any change to the natural granite appearance.
What would you recommend and can you provide a sample to try on a small area?

Unfortunately what you are asking for, the sealer not to show but last a long time, is kind of an either or situation. Invisible sealers such as you are asking for are more like a stain guard rather than a sealer and as such offers little to no protecting agains wear, so needs regular re-coating, a sealer on the other hand will last years before needing re-coating but will leave a finish to the surface.

I think your best bet might be to try the Water based matt sealer (link below) this will offer the longevity you want with minimal change to the appearance when the stone is dry.

Water Based Sealer Matt (WB25)

Drew Palin