May, 2018

Sealant

   Posted in FAQ, Sealants   

This question was asked by
PAULINE HOYLES

To mix the adgrip with the sealant my husband wants to know if it can be mixed in a plastic trough.?

If by plastic trough you mean a roller bucket then yes, if you mean something like a planter then no,

The solvent in the sealer can melt some plastics.

The Adgrip does mix pretty easily all you need to do is add it to the drum and either up end it a few times or roll it around on the grass a few times, if the can is stood for 5-10 mins you will need to give it a quick mix again.

Drew Palin

Feedback

   Posted in Sealants, Testimonials   

This question was asked by
Toni Storer

I would just like to thank you for supplying me “Gloss Finish Sealer” I brought this for my hallway floor to try it as I have tried many of products, as your by far is outstanding and worked. My floor is amazing and shiny and I will be buying more the do my kitchen and diner along with my utility room. Honestly it’s a fantastic product and many thanks.
Your product has transformed my floors.
Kindest Regards & keep up the good work.

Toni Storer

Hi Toni

Thank you for your kind feedback, it is not often that we get positive feedback, if you could send the pics over that would be great.

Thanks again
Drew

Drew Palin

Staining a new driveway

   Posted in Driveway, External Sealants, FAQ, Paving, Sealants   

This question was asked by
Mrs Vanessa J Warren

We have just had a driveway done and the flags are too light in colour (I like them when they are wet!) Looking to darken them up in a grey but need to know exact colour and maybe try them out first (I have spare flags to test on)

If the flags look ok when they are wet then all you need to do is apply a sealer, this will leave the flags looking like they do when they are wet and it will protect them from stains and general wear and tear.

I have linked a couple of products below (you didn’t say if they were concrete or natural stone flags) the first one is for concrete surfaces and the second is for stone.

Block Paving & Imprinted Concrete Sealer SP (BPCSP)

Stone & Slate Protector (SSP)

Drew Palin

Endura Faux Fusion

   Posted in Colouring, Concrete, FAQ, Sealants, water based   

This question was asked by
gary heavisides

I am interested in using this product and was wondering what is the best way to apply this product, I noticed that you sell special brushes to apply stains but I wanted to know if you can apply Endura Faux Fusion with a roller, also does it need to be sealed after application?

The Endura can be applied by brush, roller or sprayer, and yes it does need sealing after, ideally with the water based sealer

Water Based Sealer Matt (WB25)

Water Based Sealer Gloss (WB34)

Drew Palin