Green Klean Concrete & Mortar Dissolver

The eco-friendly, alternative to harsh cleaning acids or hazardous etching chemicals. The advanced liquid formula dissolves and physically breaks down mortar and concrete by attacking the Portland Cement and other unique chemical component, reducing it to a soft paste that’s easy to clean and remove from the surface.  Use Green Kleen to safely clean, dissolve and remove concrete, cured cement, mortar, grout etc... Use to clean concrete splash, trowels, screeds, hand tools, mixers, pumps, scaffolds, spot boards, trucks, trailers and silos, saws drills, generators, augers and more!

Available in 5 and 15 litre containers

Support and Tech Info:

We are more than happy to share our extensive practical and technical knowledge and expertise with you. Whether you are sealing for the first time, an experienced installer or a Specifier with a technical query, we are here to help
telephone: 01204 362828
email: sales@advancedsealingsolutions.co.uk

Click to send us a question

• 100% biodegradable
• Non-hazardous to equipment
• Eco-friendly
• Non-corrosive
• Non-fuming
• Non-flammable

Adseal Green Klean™ is a liquid chemical that dissolves concrete and mortar for easier cleaning. It is the eco-friendly, non-fuming alternative to harsh cleaning acids or hazardous etching chemicals. The advanced liquid formula dissolves and physically breaks down concrete by attacking the Portland cement and other unique chemical properties, reducing it to a mush that’s easy to clean and remove from the surface.

Uses and Benefits

Use Green Klean to safely clean, dissolve and remove concrete, cured cement, mortar, grout and render. Use to clean trowels, screeds, hand tools, mixers, pumps, scaffolds, mud tubs, spot boards, trucks, trailers and silos, saws, drills, generators, augers and more. May be used to etch concrete and open the surface pores in preparation for decorative coatings.

Application Prerequisites

Green Klean is water-neutralized. Never wet surface with water before applying Green Klean Protect walls and adjacent areas where dissolving is not desired DO NOT dilute Green Klean.

Application of Green Klean

1. Green Klean is intended to be used as provided and NOT diluted.
2. Apply with a NewLook Applicator Brush or Sprayer. Some tools may be soaked in trays.
3. Completely saturate concrete with Green Klean. Surface will turn white, then darken.
4. White residue may appear if Green Klean evaporates.
5. Do not rinse. RE-apply to reactivate as needed until concrete has softened and dissolved.
6. Allow Green Klean to penetrate 10-15 minutes. Keep surface saturated.
7. Concrete will soften and release from surface after approximately 20-30 minutes.
8. Needed soak time depends on the thickness of material being removed.
9. Rinse with cold water. Use a garden hose with nozzle or pressure washer.
10. Repeat as needed.
11. Green Klean will not harm paint, metal or wood. Only Portland Cement.
12. Green Klean may also be used for concrete etching.
13. Apply with a wand sprayer evenly. When etch time has completed, neutralize with water.
14. A mop may be necessary to clean up the residue.

Storage

Store in original container in areas inaccessible to children and pets.
Keep containers tightly sealed.
Do not reuse empty container. Rinse empty container and replace cap before discarding.
DO NOT allow product to freeze.

Limitations

Any water on the material will neutralize the effects of Green Klean and it will no longer be effective. Avoid prolonged contact with concrete surfaces that should not be dissolved. CAUTION KEEP AWAY FROM CHILDREN AND ANIMALS. Before using or handling, read the MSDS and Product Instructions. DO NOT CONSUME. Avoid contact with eyes and skin. Wear rubber gloves, aprons and safety eye goggles. Use good hygiene when handling this product. It is recommended that you wash and bathe after each use.