Adseal ‘SATIN’
Adseal Satin is designed to give both flexibility of finish and outstanding results on unglazed natural materials such as Marble, Stone, Slate, Travetine, Terracotta, and also on Engineered stone.
The Finish of Your Choice
This is a special ‘high-build’ product – you choose whether you want a low decorative sheen or a satin finish. A ready to use solvent based protector. Simply apply one coat for a delicate colour enhancing low sheen and add further coats to increase the shine right up to a low gloss.
Adseal ‘Satin’ largely prevents staining and facilitates routine maintenance plus it has very little effect on the slip resistance of the surface when applied as a low sheen single coat. Subsequent coats may reduce slip resistance.
Developed by our own design team and consultant organic chemists, this fantastic product offers ease of installation with excellent performance and longevity and is ideal for use as:
- Natural Stone sealer
- Slate sealer and slate tile sealer
- Marble, limestone sealer
- Terracotta and travertine sealer
- and for most natural paving
- also engineered paving products such as Marshalls, Bradstone, etc.
- Wall and floor surfaces
- Stairs and Terraces, etc.
- Kitchen and conservatory floors
- Can be used indoors or outdoors
Benefits:
- Limited effect on slip resistance of the treated surface
- Hygienic – stains just wash away
- Enhances the natural beauty and prevents staining
- Easily re-coatable and does NOT need stripping
- 100% UVA and fade resistant and can be used internally or externally
- Increases impact, abrasion and chemical resistance for increased life span
- Excellent coverage. Approx 10 m2 per litre depending on surface porosity
- Supplied in 500ml, 1 litre and 5 litre containers
Durability
Indoors and lightly trafficked areas, with correct maintenance and depending upon surface type, potentially 10 years plus. Externally colour will remain for 1 – 2 years although protective effect will remain for longer, potentially 4 – 6 years, depending upon surface type.
A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original forming a monolithic layer. Down time is minimised with rapid cure additives.
Fading of the colour and reduction in protective effect take place more rapidly in heavily trafficked areas and these areas can be easily ‘touched up’ without the need to strip the original coat. Lower trafficked areas will only need retreating very occasionally, if ever.
Maintenance
Sweep regularly to remove abrasive dirt and grit from surface and mop daily using a mild detergent. Spills and marks should be wiped up as soon as possible and not allowed to dry on.
Should signs of wear appear a Maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight’ coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.
Support and Tech Info:
We are more than happy to share our extensive practical and technical knowledge and expertise with you. Whether you are sealing for the first time, an experienced installer or a Specifier with a technical query, please call us on 01204 362828 or email enquiries@advancedsealingsolutions.co.uk we are here to help.
|
