Home :: Internal Sealers :: Satin Finish Sealer

Satin Finish Sealer

Satin Finish Sealer
SKU INSAT500
Weight 0.50 kgs
RRP: £18.89
You save £ 15
Our price: £16.06 inc. VAT
Please select a container size
Qty
Satin Finish Sealer
AdSeal Satin is designed to give both flexibility of finish and outstanding results on unglazed natural materials such as Marble, Stone, Slate, Travetine, Terracotta, Also use on Engineered stone. This is a special high-build product , you choose whether you want a low decorative sheen or a satin finish. A ready to use solvent based protector.
Adseal
Product ID: INSAT5
116.00 GBP New
Satin Finish Sealer
AdSeal Satin is designed to give both flexibility of finish and outstanding results on unglazed natural materials such as Marble, Stone, Slate, Travetine, Terracotta, Also use on Engineered stone. This is a special high-build product , you choose whether you want a low decorative sheen or a satin finish. A ready to use solvent based protector.
Adseal
Product ID: INSAT1
24.96 GBP New
Satin Finish Sealer
AdSeal Satin is designed to give both flexibility of finish and outstanding results on unglazed natural materials such as Marble, Stone, Slate, Travetine, Terracotta, Also use on Engineered stone. This is a special high-build product , you choose whether you want a low decorative sheen or a satin finish. A ready to use solvent based protector.
Adseal
Product ID: INSAT500
13.38 GBP New
AdSeal Satin is designed to give both flexibility of finish and outstanding results on unglazed natural materials such as Marble, Stone, Slate, Travetine, Terracotta, Also use on Engineered stone. This is a special high-build product , you choose whether you want a low decorative sheen or a satin finish. A ready to use solvent based protector.

AdSeal Super

AdSeal Satin Finish Sealer

AdSeal Satin Finish is designed to give both flexibility of finish and outstanding results on unglazed natural materials such as Marble, Stone, Slate, Travetine, Terracotta, and also on Engineered stone.

The Finish of Your Choice

This is a special ‘high-build’ product – you choose whether you want a low decorative sheen or a satin finish. A ready to use solvent based protector. Simply apply one coat for a delicate colour enhancing low sheen and add further coats to increase the shine right up to a low gloss.

AdSeal Satin Finish largely prevents staining and facilitates routine maintenance plus it has very little effect on the slip resistance of the surface when applied as a low sheen single coat. Subsequent coats may reduce slip resistance.

Developed by our own design team and consultant organic chemists, this fantastic product offers ease of installation with excellent performance and longevity and is ideal for use as:

  • Natural Stone sealer
  • Slate sealer and slate tile sealer
  • Marble, limestone sealer
  • Terracotta and travertine sealer
  • and for most natural paving
  • also engineered paving products such as Marshalls, Bradstone, etc.
  • Wall and floor surfaces
  • Stairs and Terraces, etc.
  • Kitchen and conservatory floors
  • Can be used indoors or outdoors

Durability

Indoors and lightly trafficked areas, with correct maintenance and depending upon surface type, potentially 10 years plus. Externally colour will remain for 1 – 2 years although protective effect will remain for longer, potentially 4 – 6 years, depending upon surface type.

A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original forming a monolithic layer. Down time is minimised with rapid cure additives.

Fading of the colour and reduction in protective effect take place more rapidly in heavily trafficked areas and these areas can be easily ‘touched up’ without the need to strip the original coat. Lower trafficked areas will only need retreating very occasionally, if ever.

Maintenance

Sweep regularly to remove abrasive dirt and grit from surface and mop daily using a mild detergent. Spills and marks should be wiped up as soon as possible and not allowed to dry on.

Should signs of wear appear a Maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight’ coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.

Support and Tech Info:

We are more than happy to share our extensive practical and technical knowledge and expertise with you. Whether you are sealing for the first time, an experienced installer or a Specifier with a technical query, we are here to help
telephone: 01204 362828
email: sales@advancedsealingsolutions.co.uk

Benefits:

  • Limited effect on slip resistance of the treated surface
  • Hygienic – stains just wash away
  • Enhances the natural beauty and prevents staining
  • Easily re-coatable and does NOT need stripping
  • 100% UVA and fade resistant and can be used internally or externally
  • Increases impact, abrasion and chemical resistance for increased life span
  • Excellent coverage. Approx 10 m2 per litre depending on surface porosity
  • Supplied in 500ml, 1 litre and 5 litre containers

Technical Data Sheet for Satin Finish Sealer Enhancer

Technical Data Sheet for Satin Finish Sealer
: *
: *
: *
Type the characters you see in the picture:


*
Secure online payments cccccc